Quick drying Primer & Undercoat for multi-surfaces
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
Key information
Coverage
Up to 12m2/Unit
Drying Time
Touch dry in 2 hours. Leave 2 hours to dry between coats. Fully dry in 6 hours.
Coats
1
Product Features
For interior & exterior wood, metal & masonary surfaces
Primer & undercoat
Quick drying
Product Description
"Dulux Primer & Undercoat Multi Surfaces is suitable for interior or exterior wood, metal and masonry surfaces. Thanks to its Quick Dry formulation, it's easy and convenient to use. Please note that highly resinous wood or corroded metal will require a specialist primer. This product is covered by the Dulux Promise, our promise that our paint will give you the perfect colour with a uniform finish and the coverage stated, or we'll replace it. Terms and conditions apply [dulux.co.uk/promise]. Claims must be made within 6 months of purchase, proof of purchase required. We reserve our right to send a representative to inspect work undertaken. Colour claims limited to 10L per customer. UK purchases only. For further advice contact AkzoNobel Customer Advice centre on 0333 222 7171, for claims duluxpromise@akzonobel.com"
Application Description
Stir thoroughly before use to ensure completely mixed. Apply 1 coat with a brush to previously coated surfaces or 2 coats to bare surfaces. Leave 2 hours to dry between coats. When fully dry, apply an appropriate Dulux paint system.
Health & Safety
Contains- 1,2-Benzisothiazol-3(2H)-one, C(M)IT/MIT(3-1). May produce an allergic reaction.
Remove flaking or defective paint and sand down the surface to remove any sheen. Refer to health, safety and environmental information. Make sure the surface is clean (no dirt or grease) and dry. If the surface is damaged, repair using the appropriate Polycell product. Coverage up to 12m2.
2.
Cleaning
Remove paint from the brush with a cloth and then wash with water.
3.
Storing
Store paint in dry conditions and protect from extreme temperatures.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
