Dulux Visualiser

Instantly visualise this colour on your walls
View

Dulux Paint Mixing Easycare Bathroom Soft Sheen

Dulux Easycare Bathroom+ Soft Sheen is an exceptionally tough moisture and steam resistant paint.
£24.19
Blood Orange
Size
Paint Calculator
At the moment it is not possible to order this product online. Keep an eye on the website, we are working hard to replenish the stock.
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Soft Sheen
  • Coverage Up to 14m2/litre
  • Drying Time Leave 6 hours to dry.
  • Coats 2
Product Features
  • Moisture resistant
  • Guarantee 5 years

Product Description

Dulux Easycare Bathroom paint is an exceptionally tough moisture and steam resistant paint. Its mould resistant formulation protects the paint against mould for five years, keeping your bathroom looking great for longer.

Our mixing products allow us to offer a wider range of colours by mixing your chosen colour to order.

This product is covered by the Dulux Promise, our promise that our paint will give you the perfect colour with a uniform finish and the coverage stated, or we'll replace it.

Terms and conditions apply [dulux.co.uk/promise]. Claims must be made within 6 months of purchase, proof of purchase required. We reserve our right to send a representative to inspect work undertaken. Colour claims limited to 10L per customer. UK purchases only. For further advice contact AkzoNobel Customer Advice centre on 0333 222 7171, for claims duluxpromise@akzonobel.com

Application Description

Stir thoroughly with a palette knife or similar implement before use. For normal use thinning is not required. However, in hot weather and warm environments, up to 10% clean water may be added and stirred in to ease application. Apply 1 or 2 coats using a suitable brush or roller. Allow a minimum of 6 hours between coats. When conditions are colder, more time must be allowed for the first coat to dry. Allow a minimum of 24 hours for the paint to fully dry.

Health & Safety

Contains - C(M)IT/MIT(3:1) and 1,2-benzisothiazol-3(2H)-one. - May produce an allergic reaction.

Tips & Advice

  • 1. Preparing the Surfaces
    To get the best results with Dulux Bathroom+, make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry).

    Before surface preparation, read the information in the Safety, Health And Environmental Information section about old lead paints.

    Any surface defects should be filled with the appropriate http://www.polycell.co.uk/products/fillers.jsp Polycell Polyfilla product.

    For best colour consistency, purchase sufficient mixed paint for each job including touch in at one time from the same source.

    General preparation: Remove any loose or flaking paint. Where necessary, wash the surface to remove dirt, grease etc. Treat surfaces affected by mould growth with a suitable fungicidal wash. Sand down to remove any sheen.

    Seal new, bare and porous surfaces with a thinned coat of Dulux Easycare Bathroom+ (10% clean water). Porous surfaces, including previously unpainted patterned textured ceiling coatings, new buildings that have a plasterboard finish and wallcoverings that are suitable for painting (not vinyl or washables) should be sealed with Dulux Plaster Sealer for best results.

    Stir thoroughly with a palette knife or similar implement before use. For normal use thinning is not required. However, in hot weather and warm environments, up to 10% clean water may be added and stirred in to ease application.

    Apply 1 or 2 coats using a suitable brush or roller. Allow a minimum of 6 hours between coats. When conditions are colder, more time must be allowed for the first coat to dry. Allow a minimum of 24 hours for the paint to fully dry.

    Precautions: Do not use this paint on radiators and other heated surfaces. Do not use abrasive cleaners to clean the painted surface. Vigorous scouring may impair the finish. Do not use or store the paint in extremes of temperature.

    Clean the painted surface using a very soft cloth and clean soapy water. Protect the paint from frost. Very slight variation in colour may occur between different cans of coloured paint. When using more than one can it is advisable to mix them together in a larger container or finish in a corner before starting a new can.
  • 2. Cleaning
    Cleaning up after painting: Remove as much paint as possible from brushes and rollers before washing with clean water.
  • 3. Storing
    Store paint in dry conditions and protect from extreme temperatures.
Easy and safe payment Paypal visa master card maestro ideal cb
Fetching the data, please wait...