A hardwearing and subtle sheen paint for interior wood and metal (excluding heated surfaces).
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
Key information
Finish
Satin
Coverage
Up to 16m2 / litre
Drying Time
6 hours
Coats
2
Product Features
Water based, low odour
Quick drying
Product Description
Dulux colour mixing Satinwood paint gives interior wood and metal a hard-wearing, subtle sheen finish. Ideal for adding a modern effect to your home.
Our mixing products allow us to offer a wider range of colours by mixing your chosen colour to order.
This product is covered by the Dulux Promise, our promise that our paint will give you the perfect colour with a uniform finish and the coverage stated, or we'll replace it.
Terms and conditions apply [dulux.co.uk/promise]. Claims must be made within 6 months of purchase, proof of purchase required. We reserve our right to send a representative to inspect work undertaken. Colour claims limited to 10L per customer. UK purchases only. For further advice contact AkzoNobel Customer Advice centre on 0333 222 7171, for claims duluxpromise@akzonobel.com
Application Description
Stir thoroughly before use to ensure the paint is completely mixed. Apply 2 coats of Dulux colour mixing Satinwood using a good quality synthetic brush. Allow 6 hours between coats, longer when cold and damp. Where a strong colour change is involved, more coats may be required. Newly painted doors should not be closed (tightly) until paint is fully dry.
Health & Safety
Precautions
Keep out of reach of children. If medical advice is needed, have product container or label at hand. Do not get in eyes, on skin, or on clothing. Call a doctor if you feel unwell. Dispose of contents and container in accordance with all local, regional, national and international regulations.
Hazard Ingredients
Contains adipohydrazide, 1,2-benzisothiazol-3(2H)-one, CMIT/MIT(3-1) and 2-methyl-2H-isothiazol-3-one. May produce an allergic reaction.
Contains - 1,2-benzisothiazol-3(2H)-one and C(M)IT/MIT(3:1). - May produce an allergic reaction.
Remove any flaking or defective paint. Sand down to remove any sheen. Ensure the surface is clean and dry. Treat any knots in wood with a suitable knotting solution. Apply an appropriate Dulux primer to bare surfaces. Surface defects should be repaired using the appropriate Polycell products.
2.
Cleaning
After use, remove as much paint as possible from brushes before cleaning with water. Store paint in dry conditions and protect from frost
3.
Storing
Store paint in dry conditions and protect from extreme temperatures.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
