Dulux Weathershield All Weather Protection Smooth Masonry Paint
Dulux Weathershield All Weather Protection Smooth Masonry Paint
Masonry Paint with a smooth finish.
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
Key information
Finish
Smooth
Coverage
Up to 15m2/litre
Drying Time
Leave 4 hours to dry and between coats.
Coats
2
Product Features
Uv resistant
Rainproof
Quick drying
Dirt resistant paint film
Mould & Algae protected paint film
15 Years protection
Product Description
Dulux Weathershield All Weather Protection Smooth Masonry Paint is an exterior wall paint formulated with our unique Stay Clean technology that protects against dirt and mould growth within the paint film for long lasting colour and finish. In addition our high performance paint protects against all weather conditions for up to 15 years.
*Our unique promise to you: Weathershield Promise- if your walls peel, flake or there is a mould growth within the paint film while you live in your home, we will return the value of a replacement product to you. Register to activate the promise. Registration & paint application required within 6 months of purchase. T&C’s apply.
Application Description
For best results, ensure the wall is dry before paint application. Apply 2 coats using a suitable brush or roller. Leave 4 hours between coats. TIP: if using more than 1 can, it is advisable to mix them together in a larger container or finish in a corner before starting a new can. Do not use on common or Fletton bricks. Apply only in dry conditions, above 10°C and when bad weather is not forecast. Leave 4 hours to dry.
Health & Safety
Harmful to aquatic life with long lasting effects. Contains: 1,2-Benzisothiazol-3(2H)-one, C(M)IT/MIT(3:1), 2-octyl-2H-isothiazol-3-one. May produce an allergic reaction. This paint contains a biocidal product for the preservation of the dry film. Contains: Terbutryn (CAS 886-50-0), OIT (CAS 26530-20-1), Zinc pyrithione (CAS 13463-41-7).
Remove loose or flaking material. Ensure surfaces to be painted are clean (no dirt, grease or flaking paint) and dry. Areas affected by mould, lichen, algae or moss should be treated with Weathershield Multi-Surface Fungicidal Wash. For best results, surfaces that remain powdery or chalking after preparation should be sealed with a primer. This will provide a sound and stable substrate for painting. Surface defects should be repaired using the appropriate Polycell product.
2.
Cleaning
Remove paint from the brush or roller with a cloth and then wash it with water.
3.
Storing
Store paint in dry conditions and protect from extreme temperatures.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
